If the Condition Indicator of the aircraft blinks yellow quickly when powered on, connecting is called for to control the aircraft with the remote controller. This tutorial has: 1. Linking the Remote Controller with the DJI Fly App 2. Connecting the Remote Controller with Mix Buttons Power on the airplane, connect the smart phone with the remote controller, and open up the DJI Fly app. Faucet Attach Airplane at the bottom right to enter the connection interface, Next, tap Setups, and afterwards touch Attach to Airplane at the end of the Control web page. The connecting procedure will start when the remote controller beeps. Press and hold the Power switch for about 4 seconds, then launch it after it starts warning. The battery indicator will certainly turn on, and the airplane will start the connecting procedure. When the remote controller quits beeping, the app will certainly show the image transmission display, showing that the linking achieved success. You can also connect the remote controller with combination switches by concurrently pushing the Personalized switch the Photo/Video button, and also the Shutter/Record button on top. The remote controller will certainly start to beep after 2 seconds. After that, you can begin the connecting process.Press and also hold the Power switch for approximately four secs as well as launch it once it starts to beep. The airplane will certainly start the connecting procedure. When the remote controller stops beeping, the application will certainly show the image transmission screen, showing that the connecting achieved success. Thank you for seeing!.
Call Now for Discount Airline Tickets
