hi my good friend below is Bahiano with Bahiano Reno, in this video clip I gon na show you just how
to replace and also reuse some old wood flooring, actually stuff, great, so they'' re hard to find since they are are old I'' m simply gon na try to use them refinish them
and they would certainly appears like new on completion, yes is this recording, on the previous video I show you exactly how to gotten rid of the floor the hard timber flooring without damage it, in this one I gon na show you recycle them and also re-install them first thing is, you can see the old ones have great deals of nails in this video clip I gon na be utilizing this pliers I discover it to be a little far better than the regular day after day pliers that would be something like this one below, this pliers have a little bit of magnet on it I can reveal you and it'' s a little bit hard to remove see when I have actually gotten rid of the accomplish else can be performed with it as well yet it'' s just this one right here I find to be a little bit better, since I simply placed it there it got a truly great and after that I eliminate it but wear'' t bang it back we simply draw everything away via, the head of the coating nails is really little, it experience and don'' t leave that much damage on the various other, on the excellent side I will show you allow me obtain a hammer, and I would show you
, we make use of'a pliers we don ' t damages the surface
side yet currently I show you.This is simply a piece that probably i am not mosting likely to be utilizing it currently I ' m gon na show you how if you bang this nail back, what happened the other side of the board you guys can seen in there one thing, you can see divided the wood in there making a big hole an additional point is if you'' re gon na to utilize you gon na need to use the hammer or something else to on the silver lining of the wood that would certainly harm much more, so it would certainly leave mark, I gon na show you, you people can see the distinction you see the holes and this is you can see like that simply pull on this side, virtually, you can not also seen a hole, great deal of nails on theses boards, you can see the flooring, so nails we took out, you men can boards there they are some boards so this set right here yes I have some board prepared here this set yeah I have eliminated nails prior to, simply to show you people they are wonderful simply gon na cut them for the dimension as well as there you go, I have gotten rid of the nails from the boards, currently I just need to cut them on the best sizes, I'' m working this coating this area right here, so below not even require a tape to go to fascinated it, this situation I not gon na need a measuring tape to measure the board, due to the fact that I simply gon na leave a little gap on each side so I'' m simply gon na select the pencil mark one board, this right here the end is bit split, so I would certainly mark both sides to cut and afterwards I simply keep marking them by doing this, when I go to the saw to reduce is simply do one journey, this one is a bit damages as well, I gon na marking it here you can see it hole of the nail in there I just gon na match the pattern in this way is simply much less visible the damage, this one is the good luck one already on the appropriate dimension, what I gon na do below before I reduced this board, because I am below I'' m simply gon na punch in some nails, that is I why have the light on my head in this way I can see I have the vacuum here, just ensure you vacuum all the dust from there that method once you do, it is nice and clean all right I'' m gon na reduce the board, I have the marks as well as then they ' re simply gon na put them
on, I gon na cut the boards'in here and also let ' s see what gon na occur, like you guys can see I ' m. attempting to conserve a long time and also cutting 2 boards at the exact same time.That way is
two cuts in one yeah this is I am simply utilizing a Ryobi.
substance meter saw, they are not that costly, as well as help this task, as soon as I have them all cut to conserve me some time I'' m just gon na sand them, you guys can see when we drew the nails little of a bump, so I just gon na cleanse the leading in this way I have a level floor, due to the fact that it is essential, various other smart would lot of fining sand, I just get a knife like this, scrape us much as I can, currently I have that component done, I just order some sandpaper yep this is the finished side this is.
not the finished side so we'' re simply doing three sides that ' s time from.
the old still have some stuff stuck in there right now I'' m simply attempting them on
to see.'if they ' re gon na work efficient the same time I still have a few little nails.
that I missed out on here this one is extremely uneven let'' s leave it to the.
last, now we have them in there I simply gon na utilize this gun a Dewalt finishing nailer, old-timer it have been with me for long period of time, still working good, for this one I am utilizing one inch and a quarter nails, all right I simply placed the boards tight, initial I will do the corners the various other edge initially I place the nails pair nails on the.
edges 2 nails one 2 one two and after that I most likely to the facility, I maintain them about.
6 inches apart 2 and 2 one two nails, and is just how you do it we have a little gap down the corner but.
it'' s going to be covered with the baseboard and also indeed a little gap on the.
corner on the brink, right you can see little space in there this remains in instance.
they timber contract as well as expand, we have a space to relocate and the would not appear yet in this one, I believe would be okay due to the fact that, it is a very old wood, however just in case hey there men, all right are we are done in below,.
like you guys can see, fairly flat we gon na need a very little sanding and yes this is like you men can see we did they scrape under.
the sanding, so this is a fairly flat it gon na need a marginal sanding and also.
this is excellent, due to the fact that time is money money'' s time so that for me in this in.
my opinion this is great looking good and for the viewpoint and wherefore.
we need this is functioning next we can show you few others locations.
that we did below on the residence, like this probably you bear in mind from the.
previous video clips was nothing in there then we complete it.
with the timber and also else in this area right here was some damage, we replace this area how we done that was by, I will reveal you men on this area gon na have a different surface for the bathroom,.
so we got rid of the boards from this location as well as conserve them to do.
to do the repairs, we didn'' t acquire any kind of board was all here yeah we did in repair work in 4 areas one, two, three, 4 locations, you can reveal you the other one was the storage room on the entryway yes this is the last spot but it is a.
component of the Reno task, we will certainly link the videos from this job below are all.
the updates video clips from this project in this way you can see them as well as we will reveal you how to do the surface on this floor in the following video, thank you significantly.
and see you individuals soon I love you individuals you have your head is blinking.
Free Coupon Download to Save up to 80% Off Your Prescription Medicines
